Comparison of Jaw Crusher vs Cone Crusher

Jaw crusher and cone crusher is two of the most common types of crusher used in the mining and quarrying industries. Both types of crusher is used to reduce the size of rocks and minerals, but they have different working principles and is better suited for different applications.

Working Principle

Jaw crusher work by using two opposing jaws to break rocks and minerals. The jaws is hinged at the top and bottom of the crusher, and they move back and forth in a crushing motion. The size of the crushed product is determined by the gap between the jaws.

Cone crusher work by using a rotating cone to crush rocks and minerals. The cone is located inside a concave crushing chamber, and the material to be crushed is fed into the top of the chamber. As the cone rotates, it forces the material down the chamber and against the walls, where it is crushed. The size of the crushed product is determined by the gap between the cone and the chamber walls.

Applications

Jaw crusher is typically used for primary crushing, which is the first stage of crushing in a mineral processing plant. They is well-suited for this application because they can handle large feed sizes and is relatively inexpensive to operate.

Cone crusher is typically used for secondary and tertiary crushing, which is the later stages of crushing in a mineral processing plant. They is well-suited for these applications because they can produce a more cubical product and have a higher capacity than jaw crusher.

Other Factors to Consider

In addition to the working principle and applications, there is a number of other factors to consider when choosing between a jaw crusher and a cone crusher, such as:

• Feed size: Jaw crusher can handle larger feed sizes than cone crusher.
• Product size: Cone crusher can produce a more cubical product than jaw crusher.
• Capacity: Cone crusher have a higher capacity than jaw crusher.
• Cost: Jaw crusher is typically less expensive to purchase and operate than cone crusher.

The best type of crusher for a particular application will depend on the specific requirements of the application. However, in general, jaw crusher is a good choice for primary crushing, while cone crusher is a good choice for secondary and tertiary crushing.