Barmac B7000 Crusher Manual in USA

The Barmac B7000 is a high-performance cone crusher that is designed for the crushing of a wide range of materials, including rocks, minerals, and aggregates. The crusher is available in a variety of configurations to meet the specific needs of each application.

This manual provides instructions on the installation, operation, and maintenance of the Barmac B7000 crusher. It is important to read and understand this manual before operating the crusher.

Installation

The Barmac B7000 crusher is shipped in several large components that must be assembled on-site. The following steps should be followed for installation:

1. Select a level, well-drained site for the crusher.
2. Excavate a foundation that is large enough to support the crusher.
3. Install the foundation according to the manufacturer’s instructions.
4. Assemble the crusher components according to the manufacturer’s instructions.
5. Connect the crusher to power and water.

Operation

The Barmac B7000 crusher is operated by a control panel that is located near the crusher. The control panel includes switches for the crusher, conveyors, and other equipment.

To operate the crusher, follow these steps:

1. Turn on the power to the crusher.
2. Start the conveyors.
3. Open the feed gate.
4. Start the crusher.

The crusher will crush the material that is fed into it. The crushed material will be discharged from the crusher through the discharge gate.

Maintenance

The Barmac B7000 crusher requires regular maintenance to ensure that it operates safely and efficiently. The following maintenance tasks should be performed on a regular basis:

• Check the crusher for leaks and damage.
• Inspect the crusher components for wear and tear.
• Lubricate the crusher components according to the manufacturer’s instructions.
• Clean the crusher to remove debris.

Safety

The Barmac B7000 crusher is a powerful machine that can be dangerous if it is not operated properly. The following safety precautions should be observed when operating the crusher:

• Always wear safety glasses when operating the crusher.
• Never operate the crusher if it is damaged.
• Do not feed the crusher with material that is too large or too hard.
• Keep people and animals away from the crusher when it is operating.

For more information on the Barmac B7000 crusher, please contact the manufacturer.